Eaton WCL2520-1R8-R 1.8 uH Wire Wound Chip Inductor
Eaton WCL2520-1R8-R 1.8 uH Wire Wound Chip Inductor

Eaton WCL2520-1R8-R 1.8 uH Wire Wound Chip Inductor

Share
WCL2520-1R8-R: wire wound chip inductor, 1.8 uH ±5%, Q 12 at 7.96 MHz, 320 mA rated, DCR 950 mOhm.
    • Product Details
    • Download

    Eaton WCL2520-1R8-R 1.8 uH Wire Wound Chip Inductor

    WCL2520-1R8-R at a glance: wire wound chip inductor, 1.8 uH ±5%, Q 12 at 7.96 MHz, 320 mA rated, DCR 950 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCL2520-1R8-R
    OCL1.8 uH ±5%
    Q minimum @ test frequency12 @ 7.96 MHz
    SRF minimum168 MHz
    DCR maximum @ +25 °C950 mOhm
    Rated current (20 °C rise)320 mA
    OCL test frequency7.96 MHz
    OCL test voltage500 mV
    Package2.92 x 2.79 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10930

    Mechanical Drawing

    WCL2520-1R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10930: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a wire wound chip inductor for RF and small-signal circuits: tight tolerance, defined Q, and a rated current that is set by a 20 °C self-temperature rise rather than by saturation.

    At the 320 mA rating the winding drops about 304 mV and dissipates 97.3 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 12 at 7.96 MHz with self-resonance at 168 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL2520 family this is value 9 of 33, in a range from 0.12 to 220 uH.

    Positioning in the Range

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products