Eaton WCL2520-5R6-R 5.6 uH Inductor, 190 mA Rated
Eaton WCL2520-5R6-R 5.6 uH Inductor, 190 mA Rated

Eaton WCL2520-5R6-R 5.6 uH Inductor, 190 mA Rated

Share
WCL2520-5R6-R: wire wound chip inductor, 5.6 uH ±5%, Q 12 at 7.96 MHz, 190 mA rated, DCR 1900 mOhm.
    • Product Details
    • Download

    Eaton WCL2520-5R6-R 5.6 uH Inductor, 190 mA Rated

    WCL2520-5R6-R at a glance: wire wound chip inductor, 5.6 uH ±5%, Q 12 at 7.96 MHz, 190 mA rated, DCR 1900 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberWCL2520-5R6-R
    OCL5.6 uH ±5%
    Q minimum @ test frequency12 @ 7.96 MHz
    SRF minimum40 MHz
    DCR maximum @ +25 °C1900 mOhm
    Rated current (20 °C rise)190 mA
    OCL test frequency7.96 MHz
    OCL test voltage500 mV
    Package2.92 x 2.79 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10930

    Outline Drawing

    WCL2520-5R6-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10930: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A wire wound chip inductor is a coil wound on a ceramic or ferrite core with metal end terminals, in a body the size of a resistor. Compared with a multilayer chip of the same size it gives a higher Q and a tighter tolerance, which is why it appears in filters and matching networks rather than only in supply decoupling.

    At the 190 mA rating the winding drops about 361 mV and dissipates 68.6 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 12 at 7.96 MHz with self-resonance at 40 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL2520 family this is value 15 of 33, in a range from 0.12 to 220 uH.

    Series Positioning

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    What happens above the self-resonant frequency?
    The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message