Eaton WCL2520-680-R 68 uH Chip Inductor, Q 10
Eaton WCL2520-680-R 68 uH Chip Inductor, Q 10

Eaton WCL2520-680-R 68 uH Chip Inductor, Q 10

Share
WCL2520-680-R: wire wound chip inductor, 68 uH ±5%, Q 10 at 2.52 MHz, 50 mA rated, DCR 6700 mOhm.
    • Product Details
    • Download

    Eaton WCL2520-680-R 68 uH Chip Inductor, Q 10

    WCL2520-680-R at a glance: wire wound chip inductor, 68 uH ±5%, Q 10 at 2.52 MHz, 50 mA rated, DCR 6700 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCL2520-680-R
    OCL68 uH ±5%
    Q minimum @ test frequency10 @ 2.52 MHz
    SRF minimum6.5 MHz
    DCR maximum @ +25 °C6700 mOhm
    Rated current (20 °C rise)50 mA
    OCL test frequency2.52 MHz
    OCL test voltage500 mV
    Package2.92 x 2.79 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10930

    Mechanical Dimensions & Pad Layout

    WCL2520-680-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10930: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.

    At the 50 mA rating the winding drops about 335 mV and dissipates 16.8 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 10 at 2.52 MHz with self-resonance at 6.5 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL2520 family this is value 28 of 33, in a range from 0.12 to 220 uH.

    What This Family Is For

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Why choose wire wound over multilayer?
    Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Why choose wire wound over multilayer?
    Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products