
| Parameter | Value |
|---|---|
| Orderable part number | WCL3225-100-R |
| OCL | 10 uH ±5% |
| Q minimum @ test frequency | 10 @ 2.52 MHz |
| SRF minimum | 30 MHz |
| DCR maximum @ +25 °C | 1000 mOhm |
| Rated current (20 °C rise) | 300 mA |
| OCL test frequency | 2.52 MHz |
| OCL test voltage | 500 mV |
| Package | 3.5 x 2.9 mm, 2.25 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10931 |

Drawing reproduced from Eaton Technical Data 10931: outline views
with rated mm dimensions, pad layout and marking.
A wire wound chip inductor is a coil wound on a ceramic or ferrite core with metal end terminals, in a body the size of a resistor. Compared with a multilayer chip of the same size it gives a higher Q and a tighter tolerance, which is why it appears in filters and matching networks rather than only in supply decoupling.
At the 300 mA rating the winding drops about 300 mV and dissipates 90 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.
Q of 10 at 2.52 MHz with self-resonance at 30 MHz puts the useful band comfortably below the point where the winding capacitance takes over.
Within the WCL3225 family this is value 18 of 39, in a range from 0.12 to 560 uH.
The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.
Why choose wire wound over multilayer?
Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.
Why choose wire wound over multilayer?
Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.
Why choose wire wound over multilayer?
Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd