Eaton WCL3225-2R7-R 2.7 uH Chip Inductor, Q 12
Eaton WCL3225-2R7-R 2.7 uH Chip Inductor, Q 12

Eaton WCL3225-2R7-R 2.7 uH Chip Inductor, Q 12

Share
WCL3225-2R7-R: wire wound chip inductor, 2.7 uH ±5%, Q 12 at 7.96 MHz, 420 mA rated, DCR 700 mOhm.
    • Product Details
    • Download

    Eaton WCL3225-2R7-R 2.7 uH Chip Inductor, Q 12

    WCL3225-2R7-R at a glance: wire wound chip inductor, 2.7 uH ±5%, Q 12 at 7.96 MHz, 420 mA rated, DCR 700 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberWCL3225-2R7-R
    OCL2.7 uH ±5%
    Q minimum @ test frequency12 @ 7.96 MHz
    SRF minimum120 MHz
    DCR maximum @ +25 °C700 mOhm
    Rated current (20 °C rise)420 mA
    OCL test frequency7.96 MHz
    OCL test voltage500 mV
    Package3.5 x 2.9 mm, 2.25 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10931

    Dimensions and Pad Layout

    WCL3225-2R7-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10931: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a wire wound chip inductor for RF and small-signal circuits: tight tolerance, defined Q, and a rated current that is set by a 20 °C self-temperature rise rather than by saturation.

    At the 420 mA rating the winding drops about 294 mV and dissipates 123 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 12 at 7.96 MHz with self-resonance at 120 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL3225 family this is value 11 of 39, in a range from 0.12 to 560 uH.

    Series Positioning

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    What happens above the self-resonant frequency?
    The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products