Eaton WCL3225-R12-R 0.12 uH RF Chip Inductor, SRF 850 MHz
Eaton WCL3225-R12-R 0.12 uH RF Chip Inductor, SRF 850 MHz

Eaton WCL3225-R12-R 0.12 uH RF Chip Inductor, SRF 850 MHz

Share
WCL3225-R12-R: wire wound chip inductor, 0.12 uH ±5%, Q 20 at 25.2 MHz, 450 mA rated, DCR 200 mOhm.
    • Product Details
    • Download

    Eaton WCL3225-R12-R 0.12 uH RF Chip Inductor, SRF 850 MHz

    WCL3225-R12-R at a glance: wire wound chip inductor, 0.12 uH ±5%, Q 20 at 25.2 MHz, 450 mA rated, DCR 200 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberWCL3225-R12-R
    OCL0.12 uH ±5%
    Q minimum @ test frequency20 @ 25.2 MHz
    SRF minimum850 MHz
    DCR maximum @ +25 °C200 mOhm
    Rated current (20 °C rise)450 mA
    OCL test frequency25.2 MHz
    OCL test voltage500 mV
    Package3.5 x 2.9 mm, 2.25 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10931

    Dimensions and Pad Layout

    WCL3225-R12-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10931: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.

    At the 450 mA rating the winding drops about 90 mV and dissipates 40.5 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 20 at 25.2 MHz with self-resonance at 850 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL3225 family this is value 1 of 39, in a range from 0.12 to 560 uH.

    Positioning in the Range

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Can I place it with a standard chip shooter?
    Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products