
| Parameter | Value |
|---|---|
| Orderable part number | WCLA1005V1-330-R |
| OCL | 33 nH ±5% |
| Q minimum @ test frequency | 24 @ 250 MHz |
| SRF minimum | 2350 MHz |
| DCR maximum @ +25 °C | 650 mOhm |
| Rated current (20 °C rise) | 350 mA |
| OCL test frequency | 250 MHz |
| OCL test voltage | 500 mV |
| Package | 1.19 x 0.66 mm, 0.60 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10981 |

Drawing reproduced from Eaton Technical Data 10981: outline views
with rated mm dimensions, pad layout and marking.
A wire wound chip inductor is a coil wound on a ceramic or ferrite core with metal end terminals, in a body the size of a resistor. Compared with a multilayer chip of the same size it gives a higher Q and a tighter tolerance, which is why it appears in filters and matching networks rather than only in supply decoupling.
At the 350 mA rating the winding drops about 227 mV and dissipates 79.6 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.
Q of 24 at 250 MHz with self-resonance at 2350 MHz puts the useful band comfortably below the point where the winding capacitance takes over.
Within the WCLA1005V1 family this is value 39 of 52, in a range from 1 to 120 nH.
The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.
What happens above the self-resonant frequency?
The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.
What happens above the self-resonant frequency?
The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.
Why choose wire wound over multilayer?
Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd