
| Parameter | Value |
|---|---|
| Orderable part number | WCLA1608V1-100-R |
| OCL | 10 nH ±5% |
| Q minimum @ test frequency | 31 @ 250 MHz |
| SRF minimum | 4800 MHz |
| DCR maximum @ +25 °C | 130 mOhm |
| Rated current (20 °C rise) | 700 mA |
| OCL test frequency | 250 MHz |
| OCL test voltage | 500 mV |
| Package | 1.78 x 1.10 mm, 0.95 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10982 |

Drawing reproduced from Eaton Technical Data 10982: outline views
with rated mm dimensions, pad layout and marking.
This is a wire wound chip inductor for RF and small-signal circuits: tight tolerance, defined Q, and a rated current that is set by a 20 °C self-temperature rise rather than by saturation.
At the 700 mA rating the winding drops about 91 mV and dissipates 63.7 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.
Q of 31 at 250 MHz with self-resonance at 4800 MHz puts the useful band comfortably below the point where the winding capacitance takes over.
Within the WCLA1608V1 family this is value 11 of 31, in a range from 1.6 to 470 nH.
The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.
What happens above the self-resonant frequency?
The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.
Is the automotive version electrically different?
The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.
Can I place it with a standard chip shooter?
Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd