Eaton WCLA1608V1-121-R 120 nH RF Chip Inductor, SRF 1300 MHz
Eaton WCLA1608V1-121-R 120 nH RF Chip Inductor, SRF 1300 MHz

Eaton WCLA1608V1-121-R 120 nH RF Chip Inductor, SRF 1300 MHz

Share
WCLA1608V1-121-R: wire wound chip inductor, 120 nH ±5%, Q 32 at 150 MHz, 300 mA rated, DCR 730 mOhm.
    • Product Details
    • Download

    Eaton WCLA1608V1-121-R 120 nH RF Chip Inductor, SRF 1300 MHz

    WCLA1608V1-121-R at a glance: wire wound chip inductor, 120 nH ±5%, Q 32 at 150 MHz, 300 mA rated, DCR 730 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCLA1608V1-121-R
    OCL120 nH ±5%
    Q minimum @ test frequency32 @ 150 MHz
    SRF minimum1300 MHz
    DCR maximum @ +25 °C730 mOhm
    Rated current (20 °C rise)300 mA
    OCL test frequency150 MHz
    OCL test voltage500 mV
    Package1.78 x 1.10 mm, 0.95 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10982

    Dimensions and Pad Layout

    WCLA1608V1-121-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10982: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The value is small and the current is modest, so the design question is not saturation but Q and self-resonance. Q is quoted at one test frequency and SRF is the point where the winding capacitance takes over; both have to be read against the band the part actually works in.

    At the 300 mA rating the winding drops about 219 mV and dissipates 65.7 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 32 at 150 MHz with self-resonance at 1300 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA1608V1 family this is value 24 of 31, in a range from 1.6 to 470 nH.

    Series Positioning

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Can I place it with a standard chip shooter?
    Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products