Eaton WCLA1608V1-3R3-R 3.3 nH RF Chip Inductor, SRF 5900 MHz
Eaton WCLA1608V1-3R3-R 3.3 nH RF Chip Inductor, SRF 5900 MHz

Eaton WCLA1608V1-3R3-R 3.3 nH RF Chip Inductor, SRF 5900 MHz

Share
WCLA1608V1-3R3-R: wire wound chip inductor, 3.3 nH ±10%, Q 20 at 250 MHz, 700 mA rated, DCR 75 mOhm.
    • Product Details
    • Download

    Eaton WCLA1608V1-3R3-R 3.3 nH RF Chip Inductor, SRF 5900 MHz

    WCLA1608V1-3R3-R at a glance: wire wound chip inductor, 3.3 nH ±10%, Q 20 at 250 MHz, 700 mA rated, DCR 75 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberWCLA1608V1-3R3-R
    OCL3.3 nH ±10%
    Q minimum @ test frequency20 @ 250 MHz
    SRF minimum5900 MHz
    DCR maximum @ +25 °C75 mOhm
    Rated current (20 °C rise)700 mA
    OCL test frequency250 MHz
    OCL test voltage500 mV
    Package1.78 x 1.10 mm, 0.95 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10982

    Mechanical Drawing

    WCLA1608V1-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10982: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The value is small and the current is modest, so the design question is not saturation but Q and self-resonance. Q is quoted at one test frequency and SRF is the point where the winding capacitance takes over; both have to be read against the band the part actually works in.

    At the 700 mA rating the winding drops about 52.5 mV and dissipates 36.8 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 20 at 250 MHz with self-resonance at 5900 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA1608V1 family this is value 4 of 31, in a range from 1.6 to 470 nH.

    Series Positioning

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    What happens above the self-resonant frequency?
    The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products