Eaton WCLA2012V1-5R6-R 5.6 nH Inductor, 600 mA Rated
Eaton WCLA2012V1-5R6-R 5.6 nH Inductor, 600 mA Rated

Eaton WCLA2012V1-5R6-R 5.6 nH Inductor, 600 mA Rated

Share
WCLA2012V1-5R6-R: wire wound chip inductor, 5.6 nH ±5%, Q 50 at 1000 MHz, 600 mA rated, DCR 65 mOhm.
    • Product Details
    • Download

    Eaton WCLA2012V1-5R6-R 5.6 nH Inductor, 600 mA Rated

    WCLA2012V1-5R6-R at a glance: wire wound chip inductor, 5.6 nH ±5%, Q 50 at 1000 MHz, 600 mA rated, DCR 65 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCLA2012V1-5R6-R
    OCL5.6 nH ±5%
    Q minimum @ test frequency50 @ 1000 MHz
    SRF minimum5500 MHz
    DCR maximum @ +25 °C65 mOhm
    Rated current (20 °C rise)600 mA
    OCL test frequency250 MHz
    OCL test voltage500 mV
    Package2.30 x 1.70 mm, 1.52 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10983

    Mechanical Dimensions & Pad Layout

    WCLA2012V1-5R6-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10983: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.

    At the 600 mA rating the winding drops about 39 mV and dissipates 23.4 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 50 at 1000 MHz with self-resonance at 5500 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA2012V1 family this is value 5 of 36, in a range from 2.2 to 2200 nH.

    Where This Series Fits

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Why choose wire wound over multilayer?
    Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.

    Why choose wire wound over multilayer?
    Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products