Eaton WCLA2520V1-470-R 47 uH RF Chip Inductor, SRF 18 MHz
Eaton WCLA2520V1-470-R 47 uH RF Chip Inductor, SRF 18 MHz

Eaton WCLA2520V1-470-R 47 uH RF Chip Inductor, SRF 18 MHz

Share
WCLA2520V1-470-R: wire wound chip inductor, 47 uH ±10%, Q 20 at 2.52 MHz, 100 mA rated, DCR 8340 mOhm.
    • Product Details
    • Download

    Eaton WCLA2520V1-470-R 47 uH RF Chip Inductor, SRF 18 MHz

    WCLA2520V1-470-R at a glance: wire wound chip inductor, 47 uH ±10%, Q 20 at 2.52 MHz, 100 mA rated, DCR 8340 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCLA2520V1-470-R
    OCL47 uH ±10%
    Q minimum @ test frequency20 @ 2.52 MHz
    SRF minimum18 MHz
    DCR maximum @ +25 °C8340 mOhm
    Rated current (20 °C rise)100 mA
    OCL test frequency2.52 MHz
    OCL test voltage500 mV
    Package2.90 x 2.50 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1152

    Dimensions and Pad Layout

    WCLA2520V1-470-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1152: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The value is small and the current is modest, so the design question is not saturation but Q and self-resonance. Q is quoted at one test frequency and SRF is the point where the winding capacitance takes over; both have to be read against the band the part actually works in.

    At the 100 mA rating the winding drops about 834 mV and dissipates 83.4 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 20 at 2.52 MHz with self-resonance at 18 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA2520V1 family this is value 13 of 13, in a range from 0.22 to 47 uH.

    Positioning in the Range

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    What happens above the self-resonant frequency?
    The winding capacitance dominates and the part behaves capacitively. Keep the working band, and the harmonics that carry energy, below SRF.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products