EV1475S-J-00A 4.5-16V, 3A Sync. Step-Down Converter Evaluation Board TSOT23
EV1475S-J-00A 4.5-16V, 3A Sync. Step-Down Converter Evaluation Board TSOT23

EV1475S-J-00A 4.5-16V, 3A Sync. Step-Down Converter Evaluation Board TSOT23

Share
pMPS EV1475S-J-00A — Sync. Step-Down Converter Evaluation Board, 4.5-16V input, 3 A output, TSOT23./p
    • Product Details
    • Download

    EV1475S-J-00A 4.5-16V, 3A Sync. Step-Down Converter Evaluation Board TSOT23

    The MPS EV1475S-J-00A is an evaluation board built around the MP1475S for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 16 V input, is rated for 3 A and switches at 500 kHz. The board carries the device in its TSOT23 package.

    The EV1475S-J-00A demonstrates MPS's MP1475S, a high-frequency, synchronous, rectified, step-down converter with built-in high- side and low-side power MOSFETs.

    Key Specifications

    Part NumberEV1475S-J-00A
    Board ForMP1475S
    Board TypeEvaluation / demonstration board
    FunctionSync. Step-Down Converter Evaluation Board
    Input Voltage4.5 V to 16 V
    Current Rating3 A
    Switching Frequency500 kHz
    PackageTSOT23
    Ordering CodesEV1475S-J-00A

    Features

    • Wide 4.5V to 16V Operating Input Range
    • 120mΩ/50mΩ Low RDS(ON) Internal Power MOSFET
    • High-Efficiency Synchronous Mode Operation
    • Fixed 500kHz Switching Frequency
    • Synchronizes from a 300kHz-to-2MHz External Clock
    • Power-Save Mode at Light Load
    • Internal Soft-Start
    • Power Good Indication
    • Over-Current Protection and Hiccup
    • Thermal Shutdown

    Evaluation Board

    EV1475S-J-00A evaluation board
    EV1475S-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV1475S-J-00A support?
    4.5 V to 16 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV1475S-J-00A?
    TSOT23; order codes include EV1475S-J-00A.
    What are the defining features of the EV1475S-J-00A?
    Wide 4.5V to 16V Operating Input Range 120mΩ/50mΩ Low RDS(ON) Internal Power MOSFET

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products