EV1477H-TF-00B 4.2-17V, 3A High-Efficiency Evaluation Board SOT563
EV1477H-TF-00B 4.2-17V, 3A High-Efficiency Evaluation Board SOT563

EV1477H-TF-00B 4.2-17V, 3A High-Efficiency Evaluation Board SOT563

Share
pMPS EV1477H-TF-00B — High-Efficiency, 4.2-17V input, 3 A output, SOT563./p
    • Product Details
    • Download

    EV1477H-TF-00B 4.2-17V, 3A High-Efficiency Evaluation Board SOT563

    The MPS EV1477H-TF-00B is an evaluation board built around the MP1477H for bench characterisation of the device in its intended topology. It operates from a 4.2 V to 17 V input, is rated for 3 A and switches at 1.2 MHz. The board carries the device in its SOT563 package.

    The EV1477H-TF-00B Evaluation Board is designed to demonstrate the capabilities of MPS' MP1477H, a fully-integrated high- frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs.

    Key Specifications

    Part NumberEV1477H-TF-00B
    Board ForMP1477H
    Board TypeEvaluation / demonstration board
    FunctionHigh-Efficiency
    Input Voltage4.2 V to 17 V
    Current Rating3 A
    Switching Frequency1.2 MHz
    InterfacePWM
    PackageSOT563
    Ordering CodesEV1477H-TF-00B

    Features

    • Wide 4.2V-to-17V Operating Input Range
    • 58mΩ/25mΩ Low-RDS(ON) Internal Power MOSFETs
    • 200µA Low IQ Current
    • High-Efficiency Synchronous-Mode Operation
    • Forced PWM Mode Operation
    • Fast Load Transient Response
    • 1.2MHz Switching Frequency
    • Internal Soft-Start
    • Over-Current Protection and Hiccup
    • Thermal Shutdown

    Evaluation Board

    EV1477H-TF-00B evaluation board
    EV1477H-TF-00B evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV1477H-TF-00B support?
    4.2 V to 17 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV1477H-TF-00B?
    SOT563; order codes include EV1477H-TF-00B.
    What are the defining features of the EV1477H-TF-00B?
    Wide 4.2V-to-17V Operating Input Range 58mΩ/25mΩ Low-RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message