EV150-J-00A Offline Primary Side Regulator EV Board Evaluation Board TSOT23

Product

EV150-J-00A Offline Primary Side Regulator EV Board Evaluation Board TSOT23

Share

pMPS EV150-J-00A — Offline Primary Side Regulator EV Board, TSOT23./p

[email protected]

MPS TSOT23 Power Management Evaluation Boards

Product Details
Download

EV150-J-00A Offline Primary Side Regulator EV Board Evaluation Board TSOT23

The MPS EV150-J-00A is an evaluation board built around the MP150 for bench characterisation of the device in its intended topology. The board carries the device in its TSOT23 package.

MP150 is a primary side regulator providing accurate constant voltage (CV) regulation without the Opto-coupler, support Buck, Buck- Boost and Flyback topologies.

Key Specifications

Part Number	EV150-J-00A
Board For	MP150
Board Type	Evaluation / demonstration board
Function	Offline Primary Side Regulator EV Board
Output Power	2 W
Package	TSOT23
Ordering Codes	EV150-J-00A

Features

Primary side constant voltage (CV) control, supporting Buck, Buck-Boost and Flyback topologies
Integrated 500V/30Ω MOSFET
< 150mW No-load power consumption
Up to 2W output power
Maximum DCM output current lower than 120mA, maximum CCM output current lower than 200mA
Frequency Foldback
Maximum frequency limitation
Peak Current Compression
Internal High Voltage Current Source

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.