EV1530-Q-00A Triple Output Step-Up Plus Charge Pump Evaluation Board SOT23

Product

EV1530-Q-00A Triple Output Step-Up Plus Charge Pump Evaluation Board SOT23

Share

pMPS EV1530-Q-00A — Triple Output Step-Up Plus Charge Pump, SOT23./p

[email protected]

MPS SOT23 Power Management Evaluation Boards Step-Up

Product Details
Download

EV1530-Q-00A Triple Output Step-Up Plus Charge Pump Evaluation Board SOT23

The MPS EV1530-Q-00A is an evaluation board built around the MP1530 for bench characterisation of the device in its intended topology. It switches at 1.4 MHz. The board carries the device in its SOT23 package.

The EV1530-Q-00A evaluation board is designed to demonstrate the capabilities of MPS' MP1530 triple output step-up converter which is capable of powering a TFT panel from a regulated 3.3V or 5V.

Key Specifications

Part Number	EV1530-Q-00A
Board For	MP1530
Board Type	Evaluation / demonstration board
Function	Triple Output Step-Up Plus Charge Pump
Switching Frequency	1.4 MHz
Peak Efficiency	95%
Package	SOT23
Ordering Codes	EV1530-Q-00A

Features

2.7 to 5.5V Operating Input Range
2.8A Switch Current Limit
3 Outputs In Single Package
Step-Up Converter up to 22V
Positive 20mA Linear Regulator
Negative 20mA Linear Regulator
250mΩ Internal Power MOSFET Switch
Up to 95% Efficiency
1μA Shutdown Mode
Fixed 1.4MHz Frequency

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.