EV1907-Q-00A 18V High Frequency Half-Bridge Gate Driver EV Board Evaluation Board QFN10

Product

EV1907-Q-00A 18V High Frequency Half-Bridge Gate Driver EV Board Evaluation Board QFN10

Share

pMPS EV1907-Q-00A — High Frequency Half-Bridge Gate Driver EV Board, 18V input, QFN10./p

[email protected]

MPS QFN10 Power Management Evaluation Boards

Product Details
Download

EV1907-Q-00A 18V High Frequency Half-Bridge Gate Driver EV Board Evaluation Board QFN10

The MPS EV1907-Q-00A is an evaluation board built around the MP1907 for bench characterisation of the device in its intended topology. It accepts up to 18 V at the input. The board carries the device in its QFN10 package.

Key Specifications

Part Number	EV1907-Q-00A
Board For	MP1907
Board Type	Evaluation / demonstration board
Function	High Frequency Half-Bridge Gate Driver EV Board
Input Voltage	up to 18 V
Quiescent Current	150 µA
Interface	PWM
Package	QFN10
Ordering Codes	EV1907-Q-00A

Features

Drives N-Channel MOSFET Half Bridge
100V VBST Voltage Range
On-Chip Bootstrap Diode
Typical 20ns Propagation Delay Time
Less Than 5ns Gate Drive Matching
Drives 1nF Load with 12ns/9ns Rise/Fall Times with 12V VDD
TTL Compatible Input
Less Than 150μA Quiescent Current
UVLO for Both High Side and Low Side
In QFN10 3x3mm Packages

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.