EV2005DD-01B 2.5-5V, 500mA Low-Current LDO Linear Regulator EV Board Evaluation Board QFN-8

Product

EV2005DD-01B 2.5-5V, 500mA Low-Current LDO Linear Regulator EV Board Evaluation Board QFN-8

Share

pMPS EV2005DD-01B — Low-Current LDO Linear Regulator EV Board, 2.5-5V input, 500 mA output, QFN-8./p

[email protected]

MPS LDO QFN-8 Power Management Evaluation Boards

Product Details
Download

EV2005DD-01B 2.5-5V, 500mA Low-Current LDO Linear Regulator EV Board Evaluation Board QFN-8

The MPS EV2005DD-01B is an evaluation board built around the MP2005 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 5 V input and is rated for 500 mA. The board carries the device in its QFN-8 package.

The EV2005DD-01B evaluation board demonstrates the performance of MP2005, a monolithic low-current, low-dropout LDO linear regulator.

Key Specifications

Part Number	EV2005DD-01B
Board For	MP2005
Board Type	Evaluation / demonstration board
Function	Low-Current LDO Linear Regulator EV Board
Input Voltage	2.5 V to 5 V
Current Rating	500 mA
Package	QFN-8
Ordering Codes	EV2005DD-01B

Features

Wide 1.0V to 5V Input Voltage Range
Stable with Very Small Ceramic Capacitors
75mV Dropout at 500mA Output
2% Accurate Output Voltage
Adjustable Output Range from 0.5V to 5V
Low Noise: 80µVRMS (10Hz to 100kHz)
High PSRR: 40dB at 1MHz
Stable With Low-ESR Output Capacitors
Low 100μA Ground Current
Internal Thermal Protection

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.