EV2155-Q-00A 2-5.5V DC/DC Buck-Boost Converter Evaluation Board QFN-10
EV2155-Q-00A 2-5.5V DC/DC Buck-Boost Converter Evaluation Board QFN-10

EV2155-Q-00A 2-5.5V DC/DC Buck-Boost Converter Evaluation Board QFN-10

Share
pMPS EV2155-Q-00A — DC/DC Buck-Boost Converter Evaluation Board, 2-5.5V input, QFN-10./p
    • Product Details
    • Download

    EV2155-Q-00A 2-5.5V DC/DC Buck-Boost Converter Evaluation Board QFN-10

    The MPS EV2155-Q-00A is an evaluation board built around the MP2155 for bench characterisation of the device in its intended topology. It operates from a 2 V to 5.5 V input and switches at 1 MHz. The board carries the device in its QFN-10 package.

    The EV2155-Q-00A is an evaluation board designed to demonstrate the capabilities of the MP2155, a highly efficient, low quiescent current (IQ), buck-boost converter.

    Key Specifications

    Part NumberEV2155-Q-00A
    Board ForMP2155
    Board TypeEvaluation / demonstration board
    FunctionDC/DC Buck-Boost Converter Evaluation Board
    Input Voltage2 V to 5.5 V
    Switching Frequency1 MHz
    Quiescent Current80 µA
    Peak Efficiency95%
    PackageQFN-10
    Ordering CodesEV2155-Q-00A

    Features

    • 2V to 5.5V Input Voltage (VIN) Range
    • 1.5V to 5V Adjustable Output Voltage (VOUT)
    • Up to 95% Efficiency
    • Load Disconnect During Shutdown
    • 1MHz Switching Frequency (fSW)
    • Pulse-Skip Mode (PSM) during Light-Load Operations
    • Low 80µA Quiescent Current (IQ)
    • Internal Loop Compensation for Fast Transient Response
    • Internal Soft Start (SS)
    • Short-Circuit Protection (SCP) with Hiccup Mode

    Evaluation Board

    EV2155-Q-00A evaluation board
    EV2155-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2155-Q-00A support?
    2 V to 5.5 V.
    Which package and ordering codes apply to the EV2155-Q-00A?
    QFN-10; order codes include EV2155-Q-00A.
    What are the defining features of the EV2155-Q-00A?
    2V to 5.5V Input Voltage (VIN) Range 1.5V to 5V Adjustable Output Voltage (VOUT)

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products