EV2167A-Q-00A 2.7-6V, 6A Synchronous Buck Converter Evaluation Board QFN-14
EV2167A-Q-00A 2.7-6V, 6A Synchronous Buck Converter Evaluation Board QFN-14

EV2167A-Q-00A 2.7-6V, 6A Synchronous Buck Converter Evaluation Board QFN-14

Share
pMPS EV2167A-Q-00A — Synchronous Buck Converter Evaluation Board, 2.7-6V input, 6 A output, QFN-14./p
    • Product Details
    • Download

    EV2167A-Q-00A 2.7-6V, 6A Synchronous Buck Converter Evaluation Board QFN-14

    The MPS EV2167A-Q-00A is an evaluation board built around the MPQ2167A-AEC1 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 6 V input, is rated for 6 A and switches at 2.1 MHz. The board carries the device in its QFN-14 package.

    The EV2167A-Q-00A evaluation board is designed to demonstrate the capabilities of the MPQ2167A-AEC1.

    Key Specifications

    Part NumberEV2167A-Q-00A
    Board ForMPQ2167A-AEC1
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Buck Converter Evaluation Board
    Input Voltage2.7 V to 6 V
    Current Rating6 A
    Switching Frequency2.1 MHz
    Quiescent Current42 µA
    PackageQFN-14
    Ordering CodesEV2167A-Q-00A

    Features

    • 2.7V to 6.0V Operating Input Range
    • Adjustable Output from 0.606V
    • Up to 6A Continuous Output Current
    • High-Efficiency Synchronous Mode Control
    • 35mΩ and 25mΩ Internal Power MOSFETs
    • Configurable Frequency Up to 2.2MHz
    • External SYNC Clock Up to 2.2MHz
    • 42μA Quiescent Current
    • Low Shutdown Mode Current
    • 100% Duty Cycle Operation

    Evaluation Board

    EV2167A-Q-00A evaluation board
    EV2167A-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2167A-Q-00A support?
    2.7 V to 6 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV2167A-Q-00A?
    QFN-14; order codes include EV2167A-Q-00A.
    What are the defining features of the EV2167A-Q-00A?
    2.7V to 6.0V Operating Input Range Adjustable Output from 0.606V

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products