EV2223-J-00A 4.5-18V, 2A Step-Down Converter In a 8-Pin TSOT 23 Evaluation Board TSOT23
EV2223-J-00A 4.5-18V, 2A Step-Down Converter In a 8-Pin TSOT 23 Evaluation Board TSOT23

EV2223-J-00A 4.5-18V, 2A Step-Down Converter In a 8-Pin TSOT 23 Evaluation Board TSOT23

Share
pMPS EV2223-J-00A — Step-Down Converter In a 8-Pin TSOT 23, 4.5-18V input, 2 A output, TSOT23./p
    • Product Details
    • Download

    EV2223-J-00A 4.5-18V, 2A Step-Down Converter In a 8-Pin TSOT 23 Evaluation Board TSOT23

    The MPS EV2223-J-00A is an evaluation board built around the MP2223 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 18 V input, is rated for 2 A and switches at 540 kHz. The board carries the device in its TSOT23 package.

    The MP2223 is a dual channel synchronous rectified step-down switch mode converter with built in internal power MOSFETs.

    Key Specifications

    Part NumberEV2223-J-00A
    Board ForMP2223
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter In a 8-Pin TSOT 23
    Input Voltage4.5 V to 18 V
    Current Rating2 A
    Switching Frequency540 kHz
    PackageTSOT23
    Ordering CodesEV2223-J-00A

    Features

    • Wide 4.5V to 18V Operating Input Range
    • 70mΩ/50mΩ for CH1, 100mΩ/60mΩ for CH2, Low Rds(on) Internal Power MOSFETs
    • Up to 3A (CH1) and 2A (CH2) Maximum Continuous Output Current
    • 180˚ out-of-phase Operation
    • Power Save Mode for Light Load
    • 540kHz Fixed Switching Frequency
    • OCP Protection and Hiccup
    • OVP Protection
    • Thermal Shutdown
    • Both Channel Output Adjustable from 0.8V

    Evaluation Board

    EV2223-J-00A evaluation board
    EV2223-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2223-J-00A support?
    4.5 V to 18 V. The rated output is 2 A.
    Which package and ordering codes apply to the EV2223-J-00A?
    TSOT23; order codes include EV2223-J-00A.
    What are the defining features of the EV2223-J-00A?
    Wide 4.5V to 18V Operating Input Range 70mΩ/50mΩ for CH1, 100mΩ/60mΩ for CH2, Low Rds(on) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products