EV2240-J-00A 6-16V, 3A Sync. Step-Down Switch Evaluation Board TSOT23
EV2240-J-00A 6-16V, 3A Sync. Step-Down Switch Evaluation Board TSOT23

EV2240-J-00A 6-16V, 3A Sync. Step-Down Switch Evaluation Board TSOT23

Share
pMPS EV2240-J-00A — Sync. Step-Down Switch Evaluation Board, 6-16V input, 3 A output, TSOT23./p
    • Product Details
    • Download

    EV2240-J-00A 6-16V, 3A Sync. Step-Down Switch Evaluation Board TSOT23

    The MPS EV2240-J-00A is an evaluation board built around the MP2240 for bench characterisation of the device in its intended topology. It operates from a 6 V to 16 V input, is rated for 3 A and switches at 800 kHz. The board carries the device in its TSOT23 package.

    The EV2240-J-00A demonstrates MPS's MP2240, a high-frequency, synchronous, rectified, step-down converter with built-in high- side and low-side power MOSFETs.

    Key Specifications

    Part NumberEV2240-J-00A
    Board ForMP2240
    Board TypeEvaluation / demonstration board
    FunctionSync. Step-Down Switch Evaluation Board
    Input Voltage6 V to 16 V
    Current Rating3 A
    Switching Frequency800 kHz
    PackageTSOT23
    Ordering CodesEV2240-J-00A

    Features

    • Wide 6V to 16V Operating Input Range
    • 80mΩ/30mΩ Low RDS(ON) Internal Power MOSFET
    • Proprietary Switching-Loss–Reduction Technique
    • High-Efficiency Synchronous Mode Operation
    • Default 800kHz Switching Frequency
    • AAM Power-Save Mode
    • Internal Soft-Start
    • OCP Protection and Hiccup
    • Thermal Shutdown
    • Output Adjustable from 0.8V

    Evaluation Board

    EV2240-J-00A evaluation board
    EV2240-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2240-J-00A support?
    6 V to 16 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV2240-J-00A?
    TSOT23; order codes include EV2240-J-00A.
    What are the defining features of the EV2240-J-00A?
    Wide 6V to 16V Operating Input Range 80mΩ/30mΩ Low RDS(ON) Internal Power MOSFET

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products