EV2319-J-00A 4.5-18V, 3A Step Down Converter Evaluation Board TSOT23
EV2319-J-00A 4.5-18V, 3A Step Down Converter Evaluation Board TSOT23

EV2319-J-00A 4.5-18V, 3A Step Down Converter Evaluation Board TSOT23

Share
pMPS EV2319-J-00A — Step Down Converter Evaluation Board, 4.5-18V input, 3 A output, TSOT23./p
    • Product Details
    • Download

    EV2319-J-00A 4.5-18V, 3A Step Down Converter Evaluation Board TSOT23

    The MPS EV2319-J-00A is an evaluation board built around the MP2319 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 18 V input, is rated for 3 A and switches at 650 kHz. The board carries the device in its TSOT23 package.

    The MP2319 is a fully-integrated high- frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs.

    Key Specifications

    Part NumberEV2319-J-00A
    Board ForMP2319
    Board TypeEvaluation / demonstration board
    FunctionStep Down Converter Evaluation Board
    Input Voltage4.5 V to 18 V
    Current Rating3 A
    Switching Frequency650 kHz
    PackageTSOT23
    Ordering CodesEV2319-J-00A

    Features

    • Wide 4.5V-to-18V Operating Input Range
    • 3A Output Current
    • 105mΩ/57mΩ Low-RDS(ON) Internal Power MOSFETs
    • Output Adjustable from 0.8V
    • EN Shutdown Output Discharge
    • Internal Soft-Start
    • High-Efficiency Synchronous-Mode Operation
    • Fixed 650kHz Switching Frequency
    • EN and Power Good for Power Sequencing
    • Over-Current Protection and Hiccup

    Evaluation Board

    EV2319-J-00A evaluation board
    EV2319-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2319-J-00A support?
    4.5 V to 18 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV2319-J-00A?
    TSOT23; order codes include EV2319-J-00A.
    What are the defining features of the EV2319-J-00A?
    Wide 4.5V-to-18V Operating Input Range 3A Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products