EV2338-TL-00A 4.5-28V, 3A Synchronous Step-Down Converter In SOT583 Package Evaluation Board
EV2338-TL-00A 4.5-28V, 3A Synchronous Step-Down Converter In SOT583 Package Evaluation Board

EV2338-TL-00A 4.5-28V, 3A Synchronous Step-Down Converter In SOT583 Package Evaluation Board

Share
pMPS EV2338-TL-00A — Synchronous Step-Down Converter In SOT583 Package, 4.5-28V input, 3 A output, SOT583./p
    • Product Details
    • Download

    EV2338-TL-00A 4.5-28V, 3A Synchronous Step-Down Converter In SOT583 Package Evaluation Board

    The MPS EV2338-TL-00A is an evaluation board built around the MP2338 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 28 V input, is rated for 3 A and switches at 430 kHz. The board carries the device in its SOT583 package.

    The EV2338 Evaluation Board is designed to demonstrate the capabilities of MPS' MP2338.

    Key Specifications

    Part NumberEV2338-TL-00A
    Board ForMP2338
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter In SOT583 Package
    Input Voltage4.5 V to 28 V
    Current Rating3 A
    Switching Frequency430 kHz
    Quiescent Current160 µA
    Peak Efficiency92%
    PackageSOT583
    Ordering CodesEV2338-TL-00A

    Features

    • Wide 4.5V-to-28V Operating Input Range
    • 115mΩ/55mΩ Low-RDS(ON) Internal Power MOSFETs
    • 160µA Quiescent Current
    • >92% Efficiency for 24V to 5V/3A Condition
    • Power Save Mode at Light Load
    • Fast Load Transient Response
    • 430kHz Switching Frequency
    • Ton Extension for Improve Dropout
    • Programmable Soft-Start Time
    • Power Good Indication

    Evaluation Board

    EV2338-TL-00A evaluation board
    EV2338-TL-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2338-TL-00A support?
    4.5 V to 28 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV2338-TL-00A?
    SOT583; order codes include EV2338-TL-00A.
    What are the defining features of the EV2338-TL-00A?
    Wide 4.5V-to-28V Operating Input Range 115mΩ/55mΩ Low-RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products