EV2349-G-00A 4.5-24V, 6.5A Low IQ Step-Down Converter Evaluation Board QFN-11
EV2349-G-00A 4.5-24V, 6.5A Low IQ Step-Down Converter Evaluation Board QFN-11

EV2349-G-00A 4.5-24V, 6.5A Low IQ Step-Down Converter Evaluation Board QFN-11

Share
pMPS EV2349-G-00A — Low IQ Step-Down Converter Evaluation Board, 4.5-24V input, 6.5 A output, QFN-11./p
    • Product Details
    • Download

    EV2349-G-00A 4.5-24V, 6.5A Low IQ Step-Down Converter Evaluation Board QFN-11

    The MPS EV2349-G-00A is an evaluation board built around the MP2349 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 24 V input, is rated for 6.5 A and switches at 700 kHz. The board carries the device in its QFN-11 package.

    The EV2349-G-00A is an evaluation board for MP2349, a fully integrated high frequency synchronous rectified step-down switch mode converter.

    Key Specifications

    Part NumberEV2349-G-00A
    Board ForMP2349
    Board TypeEvaluation / demonstration board
    FunctionLow IQ Step-Down Converter Evaluation Board
    Input Voltage4.5 V to 24 V
    Current Rating6.5 A
    Switching Frequency700 kHz
    InterfacePWM
    PackageQFN-11
    Ordering CodesEV2349-G-00A

    Features

    • Wide 4.5V to 24V Operating Input Range
    • 105μA low quiescent Current
    • 6.5A Continuous Output Current
    • 7.5A Peak Output Current
    • Adaptive COT for Fast transient
    • DC Auto Tune Loop and Remote Differential sense
    • Low RDS(ON) Internal Power MOSFETs
    • Proprietary Switching Loss Reduction Technique
    • Forced PWM, Auto PFM/PWM and Ultra- sonic Mode Selectable
    • Fixed 700kHz Switching Frequency

    Evaluation Board

    EV2349-G-00A evaluation board
    EV2349-G-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2349-G-00A support?
    4.5 V to 24 V. The rated output is 6.5 A.
    Which package and ordering codes apply to the EV2349-G-00A?
    QFN-11; order codes include EV2349-G-00A.
    What are the defining features of the EV2349-G-00A?
    Wide 4.5V to 24V Operating Input Range 105μA low quiescent Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message