GRX Technology Co, Ltd
EV2410A-JE-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board TSOT23
EV2410A-JE-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board TSOT23

EV2410A-JE-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board TSOT23

Share
pMPS EV2410A-JE-00A — Synchronous Step-Down LED Driver Evaluation Board, 8-24V input, TSOT23./p
    [email protected]
    Previous
    EV2410A-J-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board TSOT23
    MPSStep-DownTSOT23LEDPower ManagementEvaluation Boards
    • Product Details
    • Download

    EV2410A-JE-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board TSOT23

    The MPS EV2410A-JE-00A is an evaluation board built around the MP2410AGJE for bench characterisation of the device in its intended topology. It operates from a 8 V to 24 V input and switches at 1 MHz. The board carries the device in its TSOT23 package.

    The EV2410A-JE-00A Evaluation Board is designed to demonstrate the capabilities of MP2410AGJE.

    Key Specifications

    Part NumberEV2410A-JE-00A
    Board ForMP2410AGJE
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down LED Driver Evaluation Board
    Input Voltage8 V to 24 V
    Switching Frequency1 MHz
    InterfacePWM
    Peak Efficiency95%
    PackageTSOT23
    Ordering CodesEV2410A-JE-00A

    Features

    • 8V to 24V Wide Input Range
    • Synchronous Step-Down Converter
    • 100mΩ Internal High-side Power MOSFET
    • 80mΩ Internal Low-side Synchronous Rectifier
    • Peak Current Mode Control
    • 1.5A Continue Output Current
    • 100mV Feedback Voltage
    • Up to 95% Efficiency
    • Fixed 1MHz Switching Frequency
    • Analog Dimming

    Evaluation Board

    EV2410A-JE-00A evaluation board
    EV2410A-JE-00A evaluation board, as published by MPS.

    Applications

    • Infrared LED Driver
    • General LED Driver
    • Flashlight

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2410A-JE-00A support?
    8 V to 24 V.
    Which package and ordering codes apply to the EV2410A-JE-00A?
    TSOT23; order codes include EV2410A-JE-00A.
    What are the defining features of the EV2410A-JE-00A?
    8V to 24V Wide Input Range Synchronous Step-Down Converter

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    TOLL TMI3331 30V, 3A Wide-Input Range Step-Down Synchronous DC/DC Converter

    TOLL TMI3331 30V, 3A Wide-Input Range Step-Down Synchronous DC/DC Converter

    TOLL TMI3331 — high-voltage step-down (buck) converter, ESOP8, 30 V.
    EV4425M-QB-00A 4-36V, 1.5A Synchronous Step Down LED Driver Evaluation Board QFN-13

    EV4425M-QB-00A 4-36V, 1.5A Synchronous Step Down LED Driver Evaluation Board QFN-13

    MPS EV4425M-QB-00A — Synchronous Step Down LED Driver Evaluation Board, 4-36V input, 1.5 A output, QFN-13.
    MP86992 3-16V 16V, 50A, Intelli-PhaseTM Solution in a 5mmx6mm LGA Package LGA-41

    MP86992 3-16V 16V, 50A, Intelli-PhaseTM Solution in a 5mmx6mm LGA Package LGA-41

    MPS MP86992 — 16V, 50A, Intelli-PhaseTM Solution in a 5mmx6mm LGA Package, 3-16V input, 50 A output, LGA-41.
    EVQ2287-L-00A 14A Evaluation Board QFN-18

    EVQ2287-L-00A 14A Evaluation Board QFN-18

    MPS EVQ2287-L-00A — Evaluation Board, 14 A output, QFN-18, AEC-Q100.
    MP2341 4.2-24V, 2A, 1MHz Step-Down LED Driver in SOT583 Package

    MP2341 4.2-24V, 2A, 1MHz Step-Down LED Driver in SOT583 Package

    MPS MP2341 — Step-Down LED Driver in SOT583 Package, 4.2-24V input, 2 A output, SOT583.
    Chipanalog CA-IS3731CLW Digital Isolator

    Chipanalog CA-IS3731CLW Digital Isolator

    The CA‐IS373xC devices provide high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS digital I/O. Each isolation channel has a logic input and output buffer separated by capacitiv
    EV2611-L-00A 2A, 1-Cell Li-Ion Battery Switching Charger For USB and Adapter Power Evaluation Board QFN14

    EV2611-L-00A 2A, 1-Cell Li-Ion Battery Switching Charger For USB and Adapter Power Evaluation Board QFN14

    MPS EV2611-L-00A — 2A, 1-Cell Li-Ion Battery Switching Charger For USB and Adapter Power, 2 A output, QFN14.
    TOLL TMI3253N 600kHz, 18V, 3.0A Synchronous Step-Down Converter

    TOLL TMI3253N 600kHz, 18V, 3.0A Synchronous Step-Down Converter

    TOLL TMI3253N — synchronous step-down (buck) converter, SOT23-6, 18 V.
    EV2604DQ-00A 4.2V Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge Evaluation Board QFN10

    EV2604DQ-00A 4.2V Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge Evaluation Board QFN10

    MPS EV2604DQ-00A — Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge, 4.2V input, 1 A output, QFN10.
    EV2143H-D-00A 2.5-5.5V, 3A Synchronous Step-Down Switcher Evaluation Board QFN10

    EV2143H-D-00A 2.5-5.5V, 3A Synchronous Step-Down Switcher Evaluation Board QFN10

    MPS EV2143H-D-00A — Synchronous Step-Down Switcher Evaluation Board, 2.5-5.5V input, 3 A output, QFN10, AEC-Q100.