EV24830-S-00C 5-90V to 90V White LED Driver Evaluation Board SOIC

Product

EV24830-S-00C 5-90V to 90V White LED Driver Evaluation Board SOIC

Share

pMPS EV24830-S-00C — to 90V White LED Driver, 5-90V input, SOIC./p

[email protected]

MPS SOIC LED Power Management Evaluation Boards

Product Details
Download

EV24830-S-00C 5-90V to 90V White LED Driver Evaluation Board SOIC

The MPS EV24830-S-00C is an evaluation board built around the MP24830 for bench characterisation of the device in its intended topology. It operates from a 5 V to 90 V input. The board carries the device in its SOIC package.

The EV24830-S-00C is designed to demonstrate the capabilities of the MP24830, a 90V white LED driver that is suitable for step- down applications.

Key Specifications

Part Number	EV24830-S-00C
Board For	MP24830
Board Type	Evaluation / demonstration board
Function	to 90V White LED Driver
Input Voltage	5 V to 90 V
Interface	PWM
Package	SOIC
Ordering Codes	EV24830-S-00C

Features

Configurable Maximum Output Current
Buck Mode Functionality
Wide 5V to 90V Operating Input Range
Adjustable Switching Frequency
Analog and PWM Dimming
0.2V Reference Voltage
5µA Shutdown Mode
No Minimum LED Required
Stable with Low-ESR Output Ceramic Capacitors
Cycle-by-Cycle Over-Current Protection (OCP)

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.