EV2604DQ-00A 4.2V Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge Evaluation Board QFN10

Product

EV2604DQ-00A 4.2V Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge Evaluation Board QFN10

Share

pMPS EV2604DQ-00A — Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge, 4.2V input, 1 A output, QFN10./p

[email protected]

MPS charger QFN10 Power Management Evaluation Boards

Product Details
Download

EV2604DQ-00A 4.2V Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge Evaluation Board QFN10

The MPS EV2604DQ-00A is an evaluation board built around the MP2604 for bench characterisation of the device in its intended topology. It accepts up to 4.2 V at the input, is rated for 1 A and handles 1s battery stacks. The board carries the device in its QFN10 package.

The EV2604DQ-00A is an evaluation board for the MP2604, a linear, high-performance single cell Li-Ion battery charger.

Key Specifications

Part Number	EV2604DQ-00A
Board For	MP2604
Board Type	Evaluation / demonstration board
Function	Single-Cell 1A Linear Li-Ion Battery Charger without Trickle Charge
Input Voltage	up to 4.2 V
Current Rating	1 A
Battery Cells	1s
Package	QFN10
Ordering Codes	EV2604DQ-00A

Features

Input Surge up to 28V
Adapter or USB Input
Programmable Charge Current: 200mA to 1A
AC Adapter Power Good Indicator
Charge Status Indicator
Programmable Charge Termination Current Threshold
Fully Assembled and Tested

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.