EV2608DQ-00A Dual Input 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

Product

EV2608DQ-00A Dual Input 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

Share

pMPS EV2608DQ-00A — Dual Input 28V 1A Linear Li-Ion Battery Charger Evaluation Board, 1 A output, QFN10./p

[email protected]

MPS charger QFN10 Power Management Evaluation Boards

Product Details
Download

EV2608DQ-00A Dual Input 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

The MPS EV2608DQ-00A is an evaluation board built around the MP2608 for bench characterisation of the device in its intended topology. It is rated for 1 A. The board carries the device in its QFN10 package.

The EV2608DQ-00A is an evaluation board for the MP2608, a dual input, linear, high-performance single cell Li-Ion battery charger.

Key Specifications

Part Number	EV2608DQ-00A
Board For	MP2608
Board Type	Evaluation / demonstration board
Function	Dual Input 28V 1A Linear Li-Ion Battery Charger Evaluation Board
Current Rating	1 A
Package	QFN10
Ordering Codes	EV2608DQ-00A

Features

Input Surge up to 28V
Adapter and USB Dual Input
Programmable Charge Current for AC Adapter: 100mA to 1A
Pre-set USB charge Current:450mA
Proprietary Over-Voltage Protection
Proprietary Constant Voltage Auto Recharge
0.75% VBATT Accuracy
Thermal Protection
Fault and Charge Status Indicator
Internal Soft-Start

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.