EV2615A-Q-00A 4.75-18V, 2A or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package Evaluation Board

Product

EV2615A-Q-00A 4.75-18V, 2A or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package Evaluation Board

Share

pMPS EV2615A-Q-00A — or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package, 4.75-18V input, 2 A output./p

[email protected]

MPS charger Power Management Evaluation Boards

Product Details
Download

EV2615A-Q-00A 4.75-18V, 2A or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package Evaluation Board

The MPS EV2615A-Q-00A is an evaluation board built around the MP2615A for bench characterisation of the device in its intended topology. It operates from a 4.75 V to 18 V input and is rated for 2 A.

The EV2615A-Q-00A is an evaluation board for MP2615A, a switching charger for 1- or 2- cell lithium-Ion or lithium-Polymer battery packed with built-in power MOSFETs.

Key Specifications

Part Number	EV2615A-Q-00A
Board For	MP2615A
Board Type	Evaluation / demonstration board
Function	or 2- Cell Li-Ion Battery Charger In 3mm×3mm Package
Input Voltage	4.75 V to 18 V
Current Rating	2 A
Peak Efficiency	99%
Ordering Codes	EV2615A-Q-00A

Features

4.75V to 18V Operating Input Voltage
Up to 99% Duty Cycle Operation
Up to 2A Programmable Charging Current
±0.75% Full Battery Voltage Accuracy
4.35V/Cell and 4.2V/Cell Selection for Full Battery Voltage
Full Integrated Power Switches
Internal Loop Compensation
No External Reverse Blocking Diode Required
Preconditioning for Fully Depleted Battery
Charging Operation Indicator

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.