EV2615C-Q-00A 4.75-18V, 2A or 2-Cell Li-Ion Battery Charger Evaluation Board QFN-16

Product

EV2615C-Q-00A 4.75-18V, 2A or 2-Cell Li-Ion Battery Charger Evaluation Board QFN-16

Share

pMPS EV2615C-Q-00A — or 2-Cell Li-Ion Battery Charger Evaluation Board, 4.75-18V input, 2 A output, QFN-16./p

[email protected]

MPS charger QFN-16 Power Management Evaluation Boards

Product Details
Download

EV2615C-Q-00A 4.75-18V, 2A or 2-Cell Li-Ion Battery Charger Evaluation Board QFN-16

The MPS EV2615C-Q-00A is an evaluation board built around the MP2615C for bench characterisation of the device in its intended topology. It operates from a 4.75 V to 18 V input and is rated for 2 A. The board carries the device in its QFN-16 package.

The EV2615C-Q-00A is an evaluation board for the MP2615C, a switching charger for 1- or 2- cell Li-ion or Li-polymer batteries.

Key Specifications

Part Number	EV2615C-Q-00A
Board For	MP2615C
Board Type	Evaluation / demonstration board
Function	or 2-Cell Li-Ion Battery Charger Evaluation Board
Input Voltage	4.75 V to 18 V
Current Rating	2 A
Peak Efficiency	99%
Package	QFN-16
Ordering Codes	EV2615C-Q-00A

Features

4.75V to 18V Operating Input Voltage
Up to 99% Duty Cycle Operation
Up to 2A Configurable Charging Current
±0.75% Full Battery Voltage Accuracy
4.1V/Cell and 4.2V/Cell Selection for Full Battery Voltage
Fully Integrated Power Switches
Internal Loop Compensation
No External Reverse Blocking Diode Required
Preconditioning for Fully Depleted Battery
Charging Operation Indicator

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.