EV2619-V-01A 24V, 2A witching Li-Ion Battery Charger EV Board Evaluation Board SOT23
EV2619-V-01A 24V, 2A witching Li-Ion Battery Charger EV Board Evaluation Board SOT23

EV2619-V-01A 24V, 2A witching Li-Ion Battery Charger EV Board Evaluation Board SOT23

Share
pMPS EV2619-V-01A — witching Li-Ion Battery Charger EV Board, 24V input, 2 A output, SOT23./p
    • Product Details
    • Download

    EV2619-V-01A 24V, 2A witching Li-Ion Battery Charger EV Board Evaluation Board SOT23

    The MPS EV2619-V-01A is an evaluation board built around the MP2619 for bench characterisation of the device in its intended topology. It accepts up to 24 V at the input, is rated for 2 A and switches at 600 kHz. The board carries the device in its SOT23 package.

    The EV2619-V-01A is an evaluation board for the MP2619, a switching, high-performance 2-3 cell Li-Ion battery charger with built in internal power MOSFET for power path application.

    Key Specifications

    Part NumberEV2619-V-01A
    Board ForMP2619
    Board TypeEvaluation / demonstration board
    Functionwitching Li-Ion Battery Charger EV Board
    Input Voltageup to 24 V
    Current Rating2 A
    Switching Frequency600 kHz
    Peak Efficiency90%
    PackageSOT23
    Ordering CodesEV2619-V-01A

    Features

    • Charge 2-, 3- cell Li-Ion Battery Packs
    • Wide Operating Input Range
    • 2A Charging Current
    • ±0.75% VBATT Accuracy
    • Up to 90% Efficiency
    • Fixed 600kHz Frequency
    • Preconditioning for fully depleted batteries
    • Charging Operation Indicator
    • Input Supply and battery fault indicator
    • Thermal Shutdown

    Evaluation Board

    EV2619-V-01A evaluation board
    EV2619-V-01A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2619-V-01A support?
    Up to 24 V. The rated output is 2 A.
    Which package and ordering codes apply to the EV2619-V-01A?
    SOT23; order codes include EV2619-V-01A.
    What are the defining features of the EV2619-V-01A?
    Charge 2-, 3- cell Li-Ion Battery Packs Wide Operating Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message