EV2696B-Q-00A 4-11V Single-Cell Switch-Mode Charger Evaluation Board

Product

EV2696B-Q-00A 4-11V Single-Cell Switch-Mode Charger Evaluation Board

Share

pMPS EV2696B-Q-00A — Single-Cell Switch-Mode Charger, 4-11V input./p

[email protected]

MPS charger Power Management Evaluation Boards

Product Details
Download

EV2696B-Q-00A 4-11V Single-Cell Switch-Mode Charger Evaluation Board

The MPS EV2696B-Q-00A is an evaluation board built around the MP2696B for bench characterisation of the device in its intended topology. It operates from a 4 V to 11 V input and handles 1s battery stacks.

The EV2696B-Q-00A is an evaluation board designed to demonstrate the capabilities of the MP2696B, a highly integrated, flexible, single- cell switch-mode battery charger system with power path management.

Key Specifications

Part Number	EV2696B-Q-00A
Board For	MP2696B
Board Type	Evaluation / demonstration board
Function	Single-Cell Switch-Mode Charger
Input Voltage	4 V to 11 V
Battery Cells	1s
Interface	I²C
Ordering Codes	EV2696B-Q-00A

Features

4V to 11V Operating Input Range
Up to 16V Sustainable Input Voltage
500mA to 3.5A Configurable Input Current Limit
500mA to 3.6A Configurable Charge Current
3.6V to 4.45V Configurable Charge Regulation Voltage
Minimum Input Voltage Loop for Maximum Adapter Power Tracking
Analog Voltage Output IB Pin for Battery Current Monitoring
SYS Plug-In Detection
SYS No-Load Detection
SYS DP/DM Interface for BC1.2 and Non- Standard Adapters

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.