EV28119EG-00A 2.5-6V Low-Voltage 600mA Synchronous Buck Step-Down Converter Evaluation Board QFN8
EV28119EG-00A 2.5-6V Low-Voltage 600mA Synchronous Buck Step-Down Converter Evaluation Board QFN8

EV28119EG-00A 2.5-6V Low-Voltage 600mA Synchronous Buck Step-Down Converter Evaluation Board QFN8

Share
pMPS EV28119EG-00A — Low-Voltage 600mA Synchronous Buck Step-Down Converter, 2.5-6V input, 600 mA output, QFN8./p
    • Product Details
    • Download

    EV28119EG-00A 2.5-6V Low-Voltage 600mA Synchronous Buck Step-Down Converter Evaluation Board QFN8

    The MPS EV28119EG-00A is an evaluation board built around the MP28119 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 6 V input, is rated for 600 mA and switches at 1.7 MHz. The board carries the device in its QFN8 package.

    The EV28119 evaluation board is designed for low dropout step down converter applications.

    Key Specifications

    Part NumberEV28119EG-00A
    Board ForMP28119
    Board TypeEvaluation / demonstration board
    FunctionLow-Voltage 600mA Synchronous Buck Step-Down Converter
    Input Voltage2.5 V to 6 V
    Current Rating600 mA
    Switching Frequency1.7 MHz
    InterfacePWM
    Peak Efficiency89%
    PackageQFN8
    Ordering CodesEV28119EG-00A

    Features

    • High Efficiency: Up to 89%
    • 600mA Available Load Current
    • 2.5V to 6V Input Voltage Range
    • Output Voltage as Low as 0.6V
    • Short Circuit Protection
    • Thermal Fault Protection
    • Programmable Enable Control
    • Output discharge

    Evaluation Board

    EV28119EG-00A evaluation board
    EV28119EG-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV28119EG-00A support?
    2.5 V to 6 V. The rated output is 600 mA.
    Which package and ordering codes apply to the EV28119EG-00A?
    QFN8; order codes include EV28119EG-00A.
    What are the defining features of the EV28119EG-00A?
    High Efficiency: Up to 89% 600mA Available Load Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products