EV28200-G-00A 2-5.5V, 200mA Ultra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board QFN12
EV28200-G-00A 2-5.5V, 200mA Ultra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board QFN12

EV28200-G-00A 2-5.5V, 200mA Ultra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board QFN12

Share
pMPS EV28200-G-00A — Ultra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board, 2-5.5V input, 200 mA output, QFN12./p
    • Product Details
    • Download

    EV28200-G-00A 2-5.5V, 200mA Ultra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board QFN12

    The MPS EV28200-G-00A is an evaluation board built around the MP28200 for bench characterisation of the device in its intended topology. It operates from a 2 V to 5.5 V input, is rated for 200 mA and switches at 1.5 MHz. The board carries the device in its QFN12 package.

    The MP28200 is a monolithic power management unit containing 200mA high efficiency step-down switching.

    Key Specifications

    Part NumberEV28200-G-00A
    Board ForMP28200
    Board TypeEvaluation / demonstration board
    FunctionUltra Low IQ Step-down Regulator Step-Down Switcher Evaluation Board
    Input Voltage2 V to 5.5 V
    Current Rating200 mA
    Switching Frequency1.5 MHz
    PackageQFN12
    Ordering CodesEV28200-G-00A

    Features

    • Ultra Low IQ: 500nA
    • Wide 2.0V to 5.5V Operating Input Range
    • 7 Selectable Output Voltages
    • Up to 200mA Output Current
    • 1.5MHz Switching Frequency at CCM Mode
    • 100% Duty Cycle in Dropout
    • 0.25Ω and 0.25Ω Internal Power MOSFET Switches
    • Cycle-by-Cycle Over Current Protection
    • Short Circuit Protect with Hiccup Mode
    • Over Temperature Protection

    Evaluation Board

    EV28200-G-00A evaluation board
    EV28200-G-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV28200-G-00A support?
    2 V to 5.5 V. The rated output is 200 mA.
    Which package and ordering codes apply to the EV28200-G-00A?
    QFN12; order codes include EV28200-G-00A.
    What are the defining features of the EV28200-G-00A?
    Ultra Low IQ: 500nA Wide 2.0V to 5.5V Operating Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products