EV3307-J-00A 2.7-5.5V Non-Synchronized White LED Driver Evaluation Board TSOT23

Product

EV3307-J-00A 2.7-5.5V Non-Synchronized White LED Driver Evaluation Board TSOT23

Share

pMPS EV3307-J-00A — Non-Synchronized White LED Driver Evaluation Board, 2.7-5.5V input, TSOT23./p

[email protected]

MPS TSOT23 LED Power Management Evaluation Boards

Product Details
Download

EV3307-J-00A 2.7-5.5V Non-Synchronized White LED Driver Evaluation Board TSOT23

The MPS EV3307-J-00A is an evaluation board built around the MP3307 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 5.5 V input. The board carries the device in its TSOT23 package.

The MP3307 is a non-synchronous WLED step- up LED driver with 2.7V-to-5.5V input range.

Key Specifications

Part Number	EV3307-J-00A
Board For	MP3307
Board Type	Evaluation / demonstration board
Function	Non-Synchronized White LED Driver Evaluation Board
Input Voltage	2.7 V to 5.5 V
Interface	PWM
Package	TSOT23
Ordering Codes	EV3307-J-00A

Features

2.7V-to-5.5V Input Voltage
Analog Dimming with >20kHz input signal
Direct PWM dimming mode with 100Hz to 2kHz input signal
Up to 2.2MHz Programmable Switching Frequency
Low 200mV Feedback Voltage with ±1% Accuracy at Room Temperature
24V Open-Load Protection Threshold
UVLO, Thermal Shutdown
Cycle by Cycle Over Current Protection
Available in a TSOT23-8 Package

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.