EV3371-R-00A 3-30V Synchronous Boost WLED Driver Evaluation Board QFN-24
EV3371-R-00A 3-30V Synchronous Boost WLED Driver Evaluation Board QFN-24

EV3371-R-00A 3-30V Synchronous Boost WLED Driver Evaluation Board QFN-24

Share
pMPS EV3371-R-00A — Synchronous Boost WLED Driver, 3-30V input, 8 channels, QFN-24./p
    • Product Details
    • Download

    EV3371-R-00A 3-30V Synchronous Boost WLED Driver Evaluation Board QFN-24

    The MPS EV3371-R-00A is an evaluation board built around the MP3371 for bench characterisation of the device in its intended topology. It operates from a 3 V to 30 V input. The board carries the device in its QFN-24 package.

    The EV3371-R-00A is an evaluation board designed for the MP3371, a synchronous boost converter with eight current channels designed to drive WLED arrays for LCD panels in tablets and notebook backlighting applications.

    Key Specifications

    Part NumberEV3371-R-00A
    Board ForMP3371
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Boost WLED Driver
    Input Voltage3 V to 30 V
    Channels8
    InterfaceI²C
    PackageQFN-24
    Ordering CodesEV3371-R-00A

    Features

    • 8 Channels with Maximum 50mA/Channel
    • Synchronous Converter with 50V LS-FET /HS-FET with 155m/235mΩ On Resistance
    • 3V to 30V Input Voltage Range
    • 470mV LED Regulation Voltage at 20mA
    • Max 2.5% Current Matching
    • 350kHz, 500kHz, 650kHz, 800kHz, 950kHz, or 1.2MHz Selectable Switching Frequency
    • A1 Pins for Two I2C Addresses
    • 0mA to 50mA Full-Scale LED Current, 8-Bit, 0.196mA/Step
    • Selectable Sync or Non-Sync Mode
    • Linear Smooth Dimming with 2µs, 4µs, 8µs, 16µs, 32µs, 64µs, or 128µs Step-Slope Set

    Evaluation Board

    EV3371-R-00A evaluation board
    EV3371-R-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV3371-R-00A support?
    3 V to 30 V.
    Which package and ordering codes apply to the EV3371-R-00A?
    QFN-24; order codes include EV3371-R-00A.
    What are the defining features of the EV3371-R-00A?
    8 Channels with Maximum 50mA/Channel Synchronous Converter with 50V LS-FET /HS-FET with 155m/235mΩ On Resistance

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message