EV3416-J-00A 0.86-5.5V, 1.1A step-up converter Output Disconnect Evaluation Board TSOT23

Product

EV3416-J-00A 0.86-5.5V, 1.1A step-up converter Output Disconnect Evaluation Board TSOT23

Share

pMPS EV3416-J-00A — step-up converter Output Disconnect Evaluation Board, 0.86-5.5V input, 1.1 A output, TSOT23./p

[email protected]

MPS TSOT23 Power Management Converter Evaluation Boards Step-Up

Product Details
Download

EV3416-J-00A 0.86-5.5V, 1.1A step-up converter Output Disconnect Evaluation Board TSOT23

The MPS EV3416-J-00A is an evaluation board built around the MP3416 for bench characterisation of the device in its intended topology. It operates from a 0.86 V to 5.5 V input and is rated for 1.1 A. The board carries the device in its TSOT23 package.

EV3416-J-00A evaluation board is designed to demonstrate the capability of MP3416.

Key Specifications

Part Number	EV3416-J-00A
Board For	MP3416
Board Type	Evaluation / demonstration board
Function	step-up converter Output Disconnect Evaluation Board
Input Voltage	0.86 V to 5.5 V
Current Rating	1.1 A
Quiescent Current	9.5 µA
Peak Efficiency	80%
Package	TSOT23
Ordering Codes	EV3416-J-00A

Features

Input voltage range: 0.86V to 5.5V
Startup voltage range:1.25V to 5.5V
Output voltage range: 1.8V to 5.5V
9.5μA quiescent current
< 650nA shutdown current
Up to 80% efficiency at 100μA-200μA light load condition
Output disconnect in shutdown
Down mode when VIN > VOUT
Adjustable low battery detection
Internal synchronous rectifier

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.