EV4026-J-00C 90-265V Primary-side-control Evaluation Board SOT23

Product

EV4026-J-00C 90-265V Primary-side-control Evaluation Board SOT23

Share

pMPS EV4026-J-00C — Primary-side-control, 90-265V input, SOT23./p

[email protected]

MPS SOT23 Power Management Evaluation Boards

Product Details
Download

EV4026-J-00C 90-265V Primary-side-control Evaluation Board SOT23

The MPS EV4026-J-00C is an evaluation board built around the MP4026 for bench characterisation of the device in its intended topology. It operates from a 90 V to 265 V input. The board carries the device in its SOT23 package.

The EV4026-J-00C Evaluation Board is designed to demonstrate the capabilities of MP4026.

Key Specifications

Part Number	EV4026-J-00C
Board For	MP4026
Board Type	Evaluation / demonstration board
Function	Primary-side-control
Input Voltage	90 V to 265 V
Package	SOT23
Ordering Codes	EV4026-J-00C

Features

Small IC package: Thin SOT23-6
Real current control without secondary- feedback circuit
Good line/load regulation
High power factor>0.9 over universal input voltage
Boundary conduction mode improves efficiency
Input UVLO
Primary-side over current protection
Over-voltage protection(OVP)
Short-circuit protection(SCP)
Primary-side over-current protection(OCP)

Evaluation Board

Applications

T8 Tube Replacement
Solid State Lighting
Industrial & Commercial Lighting

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.