EV4033-K-00B 108VAC~132VAC/60Hz, 24V/350mA Primary-side-control Evaluation Board SOT23
EV4033-K-00B 108VAC~132VAC/60Hz, 24V/350mA Primary-side-control Evaluation Board SOT23

EV4033-K-00B 108VAC~132VAC/60Hz, 24V/350mA Primary-side-control Evaluation Board SOT23

Share
pMPS EV4033-K-00B — 108VAC~132VAC/60Hz, 24V/350mA Primary-side-control, SOT23./p
    • Product Details
    • Download

    EV4033-K-00B 108VAC~132VAC/60Hz, 24V/350mA Primary-side-control Evaluation Board SOT23

    The MPS EV4033-K-00B is an evaluation board built around the MP4033 for bench characterisation of the device in its intended topology. The board carries the device in its SOT23 package.

    The EV4033-K-00B Evaluation Board is designed to demonstrate the capabilities of MP4033 with ripple suppressor.

    Key Specifications

    Part NumberEV4033-K-00B
    Board ForMP4033
    Board TypeEvaluation / demonstration board
    Function108VAC~132VAC/60Hz, 24V/350mA Primary-side-control
    InterfacePWM
    PackageSOT23
    Ordering CodesEV4033-K-00B

    Features

    • Fast Start up
    • Adaptive Dimmer Type Detection and Phase-Cut-Based Dimming Control
    • Triac Dimmable, with Good Dimmer Compatibility and Deep Dimming Range
    • The Dimming Curve Meets Standard SSL6
    • Direct PWM Dimming
    • Real Current Control without Secondary- feedback Circuit
    • Programmable Current Fold-back to Prolong the LED Lifetime (NTC)
    • Accurate Line & Load Regulation
    • High Power Factor over 198VAC to 265VAC
    • Boundary Conduction Mode Improves Efficiency

    Evaluation Board

    EV4033-K-00B evaluation board
    EV4033-K-00B evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    Which package and ordering codes apply to the EV4033-K-00B?
    SOT23; order codes include EV4033-K-00B.
    What are the defining features of the EV4033-K-00B?
    Fast Start up Adaptive Dimmer Type Detection and Phase-Cut-Based Dimming Control

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message