EV4245-VE-00A 4-36V, 6A Buck-Boost Converter Evaluation Board QFN21
EV4245-VE-00A 4-36V, 6A Buck-Boost Converter Evaluation Board QFN21

EV4245-VE-00A 4-36V, 6A Buck-Boost Converter Evaluation Board QFN21

Share
pMPS EV4245-VE-00A — Buck-Boost Converter, 4-36V input, 6 A output, QFN21./p
    • Product Details
    • Download

    EV4245-VE-00A 4-36V, 6A Buck-Boost Converter Evaluation Board QFN21

    The MPS EV4245-VE-00A is an evaluation board built around the MP4245 for bench characterisation of the device in its intended topology. It operates from a 4 V to 36 V input, is rated for 6 A and switches at 420 kHz. The board carries the device in its QFN21 package.

    The EV4245-VE-00A is an evaluation board for MP4245, a Buck-Boost converter with 4 integrated power switches.

    Key Specifications

    Part NumberEV4245-VE-00A
    Board ForMP4245
    Board TypeEvaluation / demonstration board
    FunctionBuck-Boost Converter
    Input Voltage4 V to 36 V
    Current Rating6 A
    Switching Frequency420 kHz
    InterfaceI²C
    PackageQFN21
    LifecycleNRFND
    Ordering CodesEV4245-VE-00A

    Features

    • Support 60W Buck-Boost or 6A Peak Iout
    • Wide 4V to 36V Operating Input-Voltage Range
    • 1V to 21V Output-Voltage Range
    • 250kHz, 350kHz and 420kHz Frequency Selectable or SYNC Input
    • 11mΩ/22mΩ/12mΩ/12mΩ Low RDS_ON for Switch A/B/C/D
    • Frequency Spread Spectrum Selectable
    • Line Drop Compensation
    • Accurate CC Output-Current Limit
    • I2C Interface and 2 times programmable MTP (PMBus compatible): o PFM/PWM Mode, Current Limit, Output Voltage, Frequency Spread Spectrum, Line Drop Comp, etc. o CRC Check for MTP Integrity
    • Load Shedding Alert

    Evaluation Board

    EV4245-VE-00A evaluation board
    EV4245-VE-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV4245-VE-00A support?
    4 V to 36 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV4245-VE-00A?
    QFN21; order codes include EV4245-VE-00A.
    What are the defining features of the EV4245-VE-00A?
    Support 60W Buck-Boost or 6A Peak Iout Wide 4V to 36V Operating Input-Voltage Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message