EV4430-L-00A 3.3-36V, 3.5A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board QFN-16
EV4430-L-00A 3.3-36V, 3.5A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board QFN-16

EV4430-L-00A 3.3-36V, 3.5A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board QFN-16

Share
pMPS EV4430-L-00A — Low Quiescent Current Synchronous Step-Down Convertor Evaluation, 3.3-36V input, 3.5 A output, QFN-16./p
    • Product Details
    • Download

    EV4430-L-00A 3.3-36V, 3.5A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board QFN-16

    The MPS EV4430-L-00A is an evaluation board built around the MPQ4430GL for bench characterisation of the device in its intended topology. It operates from a 3.3 V to 36 V input and is rated for 3.5 A. The board carries the device in its QFN-16 package.

    The EV4430-L-00A is an evaluation board for the MP/MPQ4430GL.

    Key Specifications

    Part NumberEV4430-L-00A
    Board ForMPQ4430GL
    Board TypeEvaluation / demonstration board
    FunctionLow Quiescent Current Synchronous Step-Down Convertor Evaluation
    Input Voltage3.3 V to 36 V
    Current Rating3.5 A
    PackageQFN-16
    LifecycleEOL
    Ordering CodesEV4430-L-00A

    Features

    • Wide 3.3V-to-36V Operating Input Range
    • 3.5A Continuous Output Current
    • 1μA Low Shutdown Mode Current
    • 10μA Sleep Mode Quiescent Current
    • Internal 90mΩ High-Side and 40mΩ Low- Side MOSFETs
    • 350kHz to 2.5MHz Programmable Switching Frequency
    • Synchronize to External Clock Selectable In-Phase or 180° Out-of-Phase
    • Power Good Indicator
    • Programmable Soft-Start Time
    • 80ns Minimum On Time

    Evaluation Board

    EV4430-L-00A evaluation board
    EV4430-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV4430-L-00A support?
    3.3 V to 36 V. The rated output is 3.5 A.
    Which package and ordering codes apply to the EV4430-L-00A?
    QFN-16; order codes include EV4430-L-00A.
    What are the defining features of the EV4430-L-00A?
    Wide 3.3V-to-36V Operating Input Range 3.5A Continuous Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message