EV5030D-QH-00A 3A USB Charging Port Controller Evaluation Board QFN-10

Product

EV5030D-QH-00A 3A USB Charging Port Controller Evaluation Board QFN-10

Share

pMPS EV5030D-QH-00A — USB Charging Port Controller, 3 A output, QFN-10./p

[email protected]

MPS QFN-10 Controller Power Management Evaluation Boards

Product Details
Download

EV5030D-QH-00A 3A USB Charging Port Controller Evaluation Board QFN-10

The MPS EV5030D-QH-00A is an evaluation board built around the MP5030D for bench characterisation of the device in its intended topology. It is rated for 3 A. The board carries the device in its QFN-10 package.

The EV5030D-QH-00A is an evaluation board for MP5030D, which integrates an USB current limit switch and charging port identification circuit.

Key Specifications

Part Number	EV5030D-QH-00A
Board For	MP5030D
Board Type	Evaluation / demonstration board
Function	USB Charging Port Controller
Current Rating	3 A
Package	QFN-10
Ordering Codes	EV5030D-QH-00A

Features

Load Current Detection and Status Indication
Up to 14V Operating Input Voltage Range
Support DCP schemes for BC 1.2, Divider Mode and 1.2V/1.2V Mode
Support CDP Mode for USB 2.0 Data
Line Drop Compensation
Programmable High Accuracy Current Limit
32mΩ Low-RDS(ON) Power MOSFET
Input over Voltage Shutdown Protection
Thermal Shutdown

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.