EV5035-J-00A 2.9-22V, 50mA to 2A Current Limit Switch Evaluation Board TSOT23
EV5035-J-00A 2.9-22V, 50mA to 2A Current Limit Switch Evaluation Board TSOT23

EV5035-J-00A 2.9-22V, 50mA to 2A Current Limit Switch Evaluation Board TSOT23

Share
pMPS EV5035-J-00A — to 2A Current Limit Switch, 2.9-22V input, 50 mA output, TSOT23./p
    • Product Details
    • Download

    EV5035-J-00A 2.9-22V, 50mA to 2A Current Limit Switch Evaluation Board TSOT23

    The MPS EV5035-J-00A is an evaluation board built around the MP5035 for bench characterisation of the device in its intended topology. It operates from a 2.9 V to 22 V input and is rated for 50 mA. The board carries the device in its TSOT23 package.

    The EV5035-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP5035, a protection device designed to protect circuitry on the output from transients on input.

    Key Specifications

    Part NumberEV5035-J-00A
    Board ForMP5035
    Board TypeEvaluation / demonstration board
    Functionto 2A Current Limit Switch
    Input Voltage2.9 V to 22 V
    Current Rating50 mA
    PackageTSOT23
    Ordering CodesEV5035-J-00A

    Features

    • Wide 2.9V to 22V Continued Operating Input Voltage (VIN) Range
    • 26V Absolute Maximum Transient Input Voltage
    • Integrated 82mΩ Power MOSFET
    • Adjustable Current-Limit or Fixed Current Limit when floating ILIMIT pin
    • Soft Start Time Programmable through DV/DT pin
    • Fast Response for Hard Short Protection
    • OCP Hiccup Protection
    • Thermal Shutdown and Auto Retry
    • Available in TSOT23-6 Package

    Evaluation Board

    EV5035-J-00A evaluation board
    EV5035-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV5035-J-00A support?
    2.9 V to 22 V. The rated output is 50 mA.
    Which package and ordering codes apply to the EV5035-J-00A?
    TSOT23; order codes include EV5035-J-00A.
    What are the defining features of the EV5035-J-00A?
    Wide 2.9V to 22V Continued Operating Input Voltage (VIN) Range 26V Absolute Maximum Transient Input Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products