EV5036-J-00A 2.9-14V 12V, 0.4A-5A Current Limit Switch Evaluation Board TSOT23
EV5036-J-00A 2.9-14V 12V, 0.4A-5A Current Limit Switch Evaluation Board TSOT23

EV5036-J-00A 2.9-14V 12V, 0.4A-5A Current Limit Switch Evaluation Board TSOT23

Share
pMPS EV5036-J-00A — 12V, 0.4A-5A Current Limit Switch, 2.9-14V input, TSOT23./p
    • Product Details
    • Download

    EV5036-J-00A 2.9-14V 12V, 0.4A-5A Current Limit Switch Evaluation Board TSOT23

    The MPS EV5036-J-00A is an evaluation board built around the MP5036 for bench characterisation of the device in its intended topology. It operates from a 2.9 V to 14 V input. The board carries the device in its TSOT23 package.

    The EV5036-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP5036, a protection device designed to protect circuitry on the output from transients on input.

    Key Specifications

    Part NumberEV5036-J-00A
    Board ForMP5036
    Board TypeEvaluation / demonstration board
    Function12V, 0.4A-5A Current Limit Switch
    Input Voltage2.9 V to 14 V
    PackageTSOT23
    Ordering CodesEV5036-J-00A

    Features

    • Wide 2.9V to 14V Continued Operating Input Range
    • 26V Absolute Maximum Transient Input Voltage
    • Fixed 15V Over Voltage Clamp Threshold
    • Fast Output OVP Response
    • Integrated 43mΩ Power FET
    • Adjustable Current-Limit or Fixed Current Limit when floating ILIMIT pin
    • Soft Start Time Programmable through DV/DT pin
    • Fast Response for Hard Short Protection
    • OCP Hiccup Protection
    • Thermal Shutdown and Auto Retry

    Evaluation Board

    EV5036-J-00A evaluation board
    EV5036-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV5036-J-00A support?
    2.9 V to 14 V.
    Which package and ordering codes apply to the EV5036-J-00A?
    TSOT23; order codes include EV5036-J-00A.
    What are the defining features of the EV5036-J-00A?
    Wide 2.9V to 14V Continued Operating Input Range 26V Absolute Maximum Transient Input Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message