EV5077-G-00A 0.5-5.5V, 7.5A Low RDSON Load Switch With Programmable Current Limit Evaluation Board

Product

EV5077-G-00A 0.5-5.5V, 7.5A Low RDSON Load Switch With Programmable Current Limit Evaluation Board

Share

pMPS EV5077-G-00A — Low RDSON Load Switch With Programmable Current Limit, 0.5-5.5V input, 7.5 A output./p

[email protected]

MPS Power Management Evaluation Boards

Product Details
Download

EV5077-G-00A 0.5-5.5V, 7.5A Low RDSON Load Switch With Programmable Current Limit Evaluation Board

The MPS EV5077-G-00A is an evaluation board built around the MP5077 for bench characterisation of the device in its intended topology. It operates from a 0.5 V to 5.5 V input and is rated for 7.5 A.

The EV5077-G-00A is an evaluation board for the MP5077, a low RDSON load switch with current limit.

Key Specifications

Part Number	EV5077-G-00A
Board For	MP5077
Board Type	Evaluation / demonstration board
Function	Low RDSON Load Switch With Programmable Current Limit
Input Voltage	0.5 V to 5.5 V
Current Rating	7.5 A
Ordering Codes	EV5077-G-00A

Features

Integrated 10mΩ Low RDSON FETs
Adjustable Start Up Slew Rate
Wide VIN Range from 0.5V to 5.5V
<1μA Shutdown Current
Programmable 7.5A Current Limit Range
Output Discharge Function
Enable Pin
<200ns Short-Circuit Protection Response Time
Thermal Protection
Small 2mmx2mm QFN Package for Space Saving

Evaluation Board

Applications

Notebook and Tablet Computers
Portable Devices
Solid State Drives

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.