EV5087A-G-00A 0.5-5.5V, 7A Programmable Current Low RDSON Load Switch Evaluation Board QFN12

Product

EV5087A-G-00A 0.5-5.5V, 7A Programmable Current Low RDSON Load Switch Evaluation Board QFN12

Share

pMPS EV5087A-G-00A — Programmable Current Low RDSON Load Switch, 0.5-5.5V input, 7 A output, QFN12./p

[email protected]

MPS QFN12 Power Management Evaluation Boards

Product Details
Download

EV5087A-G-00A 0.5-5.5V, 7A Programmable Current Low RDSON Load Switch Evaluation Board QFN12

The MPS EV5087A-G-00A is an evaluation board built around the MP5087A for bench characterisation of the device in its intended topology. It operates from a 0.5 V to 5.5 V input and is rated for 7 A. The board carries the device in its QFN12 package.

The MP5087A is a load switch to provide 7A load protection covering 0.5V to 5.5V voltage range.

Key Specifications

Part Number	EV5087A-G-00A
Board For	MP5087A
Board Type	Evaluation / demonstration board
Function	Programmable Current Low RDSON Load Switch
Input Voltage	0.5 V to 5.5 V
Current Rating	7 A
Package	QFN12
Ordering Codes	EV5087A-G-00A

Features

Integrated 10mΩ Low RDSON FETs
Adjustable Start Up Slew Rate
Wide VIN Range from 0.5V to 5.5V
<1µA Shutdown Current
Programmable 7A Current Limit Range
Output Discharge Function
Enable Pin
Push Pull PG Indicator for VIN>3V
<200ns Short-Circuitry Response Protection
Thermal Protection

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.