EV5094-J-00A 12V, 3A Dual Channel Current Limit Switch Evaluation Board TSOT23
EV5094-J-00A 12V, 3A Dual Channel Current Limit Switch Evaluation Board TSOT23

EV5094-J-00A 12V, 3A Dual Channel Current Limit Switch Evaluation Board TSOT23

Share
pMPS EV5094-J-00A — Dual Channel Current Limit Switch, 12V input, 3 A output, TSOT23./p
    • Product Details
    • Download

    EV5094-J-00A 12V, 3A Dual Channel Current Limit Switch Evaluation Board TSOT23

    The MPS EV5094-J-00A is an evaluation board built around the MP5094 for bench characterisation of the device in its intended topology. It accepts up to 12 V at the input and is rated for 3 A. The board carries the device in its TSOT23 package.

    The EV5094-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP5094, a protection device designed to protect circuitry on the output from transients on input.

    Key Specifications

    Part NumberEV5094-J-00A
    Board ForMP5094
    Board TypeEvaluation / demonstration board
    FunctionDual Channel Current Limit Switch
    Input Voltageup to 12 V
    Current Rating3 A
    PackageTSOT23
    Ordering CodesEV5094-J-00A

    Features

    • Integrated 5V, 12V Input Dual Efuse
    • 24V 100ms Maximum Surge Input Voltage Tolerance for 12V BUS
    • 16V 100ms Maximum Surge Input Voltage Tolerance for 5V BUS
    • Integrated Dual Channel Current Limit Switch
    • 50mΩ/30mΩ Low RDS(ON) for 12V BUS/ 5V BUS Current Limit Switch
    • 110μA Typical Low Quiescent Current for 12V BUS/5V BUS
    • Soft Start Time Programmable
    • Fixed 4A/2.95A Trip/Hold Current Limit for 12V BUS
    • Fixed 3A/2.18A Trip/Hold Current Limit for 5V BUS
    • OCP Hiccup

    Evaluation Board

    EV5094-J-00A evaluation board
    EV5094-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV5094-J-00A support?
    Up to 12 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV5094-J-00A?
    TSOT23; order codes include EV5094-J-00A.
    What are the defining features of the EV5094-J-00A?
    Integrated 5V, 12V Input Dual Efuse 24V 100ms Maximum Surge Input Voltage Tolerance for 12V BUS

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products