EV5098A-D-00A 12V, 3A Dual EFUSE Evaluation Board QFN-10

Product

EV5098A-D-00A 12V, 3A Dual EFUSE Evaluation Board QFN-10

Share

pMPS EV5098A-D-00A — Dual EFUSE, 12V input, 3 A output, QFN-10./p

[email protected]

MPS QFN-10 Power Management Evaluation Boards eFuse

Product Details
Download

EV5098A-D-00A 12V, 3A Dual EFUSE Evaluation Board QFN-10

The MPS EV5098A-D-00A is an evaluation board built around the MP5098A for bench characterisation of the device in its intended topology. It accepts up to 12 V at the input and is rated for 3 A. The board carries the device in its QFN-10 package.

The EV5098A-D-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP5098A, the MP5098A is a dual 5V/12V EFUSE.

Key Specifications

Part Number	EV5098A-D-00A
Board For	MP5098A
Board Type	Evaluation / demonstration board
Function	Dual EFUSE
Input Voltage	up to 12 V
Current Rating	3 A
Package	QFN-10
Ordering Codes	EV5098A-D-00A

Features

Integrated 5V, 12V Input Dual EFUSE
Up to 18V Absolute Maximum Input Voltage for both EFUSEs
Reverse Current Blocking for the 5V channel
Negative Voltage Protection for Both EFUSEs
Integrated Dual Channel Current Limit Switch
Low 44m Ron for Both Power FETs
3A, +/-10% Current Limit of 5Vin channel
4.5A +/-10% Current Limit of 12Vin channel
5.7V typical OVP threshold for 5Vin channel
15V typical OVP threshold for 12Vin channel

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.