EV6543C-L-00A 3-22V, 100mA Three-Phase Brushless DC Motor Driver Evaluation Board QFN-24
EV6543C-L-00A 3-22V, 100mA Three-Phase Brushless DC Motor Driver Evaluation Board QFN-24

EV6543C-L-00A 3-22V, 100mA Three-Phase Brushless DC Motor Driver Evaluation Board QFN-24

Share
pMPS EV6543C-L-00A — Three-Phase Brushless DC Motor Driver, 3-22V input, 100 mA output, QFN-24./p
    • Product Details
    • Download

    EV6543C-L-00A 3-22V, 100mA Three-Phase Brushless DC Motor Driver Evaluation Board QFN-24

    The MPS EV6543C-L-00A is an evaluation board built around the MP6543C for bench characterisation of the device in its intended topology. It operates from a 3 V to 22 V input and is rated for 100 mA. The board carries the device in its QFN-24 package.

    The EV6543C-L-00A is an evaluation board for the MP6543C, a three-phase brushless DC motor driver.

    Key Specifications

    Part NumberEV6543C-L-00A
    Board ForMP6543C
    Board TypeEvaluation / demonstration board
    FunctionThree-Phase Brushless DC Motor Driver
    Input Voltage3 V to 22 V
    Current Rating100 mA
    InterfacePWM
    PackageQFN-24
    Ordering CodesEV6543C-L-00A

    Features

    • Wide 3V to 22V Input Voltage Range
    • Built-In 3.3V, 100mA LDO Regulator
    • Integrated Bidirectional Current-Sense Amplifiers
    • Supports 100% Duty Cycle Operation
    • EN/PWM Logic Input
    • Independent Ground for Each Half-Bridge
    • Over-Current Protection (OCP), Over- Temperature Protection (OTP)
    • Fault Indication Output
    • Available in a QFN-24 (3mmx4mm) Package

    Evaluation Board

    EV6543C-L-00A evaluation board
    EV6543C-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV6543C-L-00A support?
    3 V to 22 V. The rated output is 100 mA.
    Which package and ordering codes apply to the EV6543C-L-00A?
    QFN-24; order codes include EV6543C-L-00A.
    What are the defining features of the EV6543C-L-00A?
    Wide 3V to 22V Input Voltage Range Built-In 3.3V, 100mA LDO Regulator

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products